FOR MANUAL GEARBOX
FOR MANUAL GEARBOX
Well-lubricated transmissions and differentials allow you to take full advantage of the engine's power while the vehicle is traveling at different speeds.
To this end, METAL LUBE created this formulation with which to minimize friction and wear under conditions of high sliding speed and very high contact pressures.
With this formulation, abrasive, adhesive, corrosive and friction wear is avoided.
METAL LUBE guarantees the best response of transmissions, differentials, gears, reducers and other transmission organs.
Control slides to enable fast and accurate synchronization.
It guarantees a high sliding speed, reducing the resistance to the movement of the gears.
It is capable of withstanding extreme loads at high speeds. Improves cold operation and maintains stable lubricant viscosity when hot.
It reduces the excess temperature generated by friction and cools the mechanisms, taking into account that in these devices, the crankcase has little capacity and there is no cooling circuit.
Maintaining an adequate temperature in the oil prevents premature depletion of the additives that make up the oil and its oxidation, therefore, the intervals between oil changes can be lengthened.
Its powerful anti-friction action drastically reduces noise and vibration levels, improving the feel and smoothness of the gear lever.
The METAL LUBE anti-friction treatment is capable of improving the lubricity of any oil by more than 500%.
